Cooling Towers: 250-Ton
250-Ton Cooling Tower
Cooling towers are essential for any industrial facility that relies on water to remove heat from machinery. In an emergency, rental units can also provide short-term and supplemental cooling capacity for cold storage, disaster relief, and power generation applications.
Temperature Control Rental Services (TCRS) can supply your business with a high-performing 250-ton cooling tower that will add substantial value to your industrial operations.
How Our 250-Ton Cooling Tower Works
A cooling tower system consists of four primary components — the tower, recirculating pump, fan, and fill material. The system operates by utilizing water to draw out excess heat generated by a machine's operating system and then cool the water via evaporation.
The process begins when water enters the process system and removes heat. The water then moves over the tower, where air travels past it. The blending of the falling water with air results in evaporative cooling. The heat transfers from the water to the air, which elevates the air's temperature and humidity. The evaporation cools the water down.
Finally, the recirculating pump propels the cooled water back process system to repeat the cycle.
Benefits of a 250-Ton Cooling Tower
Renting a 250-ton cooling tower from TCRS can provide numerous benefits for your business:
Mobility: The 250-ton cooling tower is the smallest unit in our rental fleet. The compact design makes the system easy to transport via skid and forklift and provides more placement flexibility.
Easy installation: The smaller size also simplifies the cooling tower's installation process. You'll be able to save time and labor while minimizing disruptions to your operations. TCRS can set up the unit for you if you prefer.
Precision: This cooling tower provides precise temperature control capabilities for maximum efficiency and energy savings.
Simplified operation: A compact cooling tower is easy to use, and we can provide all the resources and expertise you need to maximize the system's performance and efficiency.
Low maintenance: A fully installed 250-ton cooling tower requires minimal service to keep it in peak operating condition. The TCRS team is available to provide timely service and maintenance 24/7 around the clock.
Common Applications
The 250-ton cooling tower is ideal for light industrial applications. Key product specifications and technical data include:
Flow temperature: The unit's maximum inlet temperature is 120 degrees Fahrenheit.
Dimensions: This cooling tower is 12 feet, 6 inches long; 7 feet, 11 inches wide; and 10 feet, 6 inches high.
Weight: This tower system weighs 5,000 pounds during shipping and rigging and 9,000 pounds when installed and operational.
Rigging: Fork slots in the basin make the cooling tower easy to transport.
Typical 250-ton cooling tower applications include:
Containment and spent fuel pool cooling
Chiller condenser water
Jacketed reactor cooling
Scrubber cooling
Supplemental cooling tower water
Technical Data
| Design |
Induced draft, counterflow cooling tower |
| Flow Temperature |
750 gmp (500 gpm minimum - 1000 gpm maximum) 95°F inlet, 85°F outlet @ 78° FWB Maximum inlet temperature 120°F |
| Electrical |
460/30/60 hertz 27 FLA |
| Fans |
1 x 25 HP Internally mounted with a shaft drive couples to the fan gearbox |
| Make Up Water |
1 x 2" MPT coupled to a brass float valve with adjustable plastic float |
| Blowdown & Drain |
3" MPT |
| Fill Material |
Hybrid Polyvinyl Chloride (HPVC) Fill is self extinguishing for fire resistance with a flame spread of 5 under A.S.T.M. designation E-84-81a |
| Piping |
1 x 6" inlet connections 1 x 6" outlet connections |
| Rigging |
Fork slots in basin |
| Dimensions |
12'6" Long x 7'11" wide x 10'6" High |
| Weights |
5000lbs Shipping and Rigging 9000lbs Operating |
Contact Us for a Cooling Tower Quote
Do you have questions about the 250-ton cooling tower or want to request a rental quote? Take the next step by calling TCRS at 877-343-8277 or submitting our online contact form today.